|
0.5’ H-Flume w/
Stainless Steel Bubble
Tube,
Approach Section, Inlet
Bulkhead and Pipe Stub
|
|
H-Type
flumes, available in HS, H, and HL styles, provide excellent accuracy
and rangability for flow in open channels where free-falling discharge
conditions occur. The flumes were designed for the study of
agricultural runoff, but are also ideally suited for monitoring storm
water run-off and industrial flow monitoring. The flat bottom of the
flume allows for the passage of silt, while the open face allows for
the passage of larger debris.
H-flumes are sized
by the depth of the flume and the geometry of the discharge face.
H-flumes differ from other flumes, as they are more V-notch weirs than
flume based on their exit geometry. They are more properly termed open
channel flow nozzles, but are listed as flumes because of historical
precedent.
|
|
Options
and Accessories
- Ultrasonic mounting
brackets
- Bubble tubes
- Sample tubes
- Submerged probe
cavities
- Stilling wells
(attached and detached)
- Staff gauges
- Removable pH probe
holders
- Approach sections
- Inlet bulkheads
- Inlet PVC pipe stubs
- Flanged inlet
connection
- Flow straighteners
- FRP grating
- Multi-piece
construction
- Chemically resistant
gel coat
|
|
Listed
below are various H-flume sizes and their recommended flow ranges.
|
|
Specifications
- Installation
Instructions - Typical Drawing
If you would like additional information, pricing,
or assistance in sizing and specifying a flume, please fill out and submit our
flume application form.
Note: If you are unable to view those materials on your
machine,
please download Adobe Acrobat® 5.0 Reader.
|
