Fill out the following form as completely as possible and click the "submit" button. One of TRACOM's experienced application specialists will analyze the results and provide you with a console quotation.
Please provide the following contact information:
Name:*
Title:
Organization:*
Occupation:*
No Selections Made Consultant-Civil Consultant-Geological Consultant-Hydrological Consultant-Mechanical Contractor-Electrical Contractor-General Contractor-Mechanical Contractor-Plumbing Contractor-Water Service Distributor Educational Facility Government Organization Industry Manufacturer's Representative Military Municipal OEM Supply House Systems Integrator
Street Address:*
Address: (cont.)
City:*
State/Province:*
Zip/Postal Code:*
Country:
United States Argentina Australia Austria Bahrain Belgium Brazil Bulgaria Canada Chile China Colombia Costa Rica Cote D'Ivoire Croatia Cyprus Czech Republic Denmark Egypt Finland France Germany Greece Hong Kong Hungary Iceland India Indonesia Ireland Israel Italy Japan Jordan Korea, Republic of Kuwait Latvia Lebanon Lithuania Luxembourg Macedonia Malaysia Malta Mexico Netherlands New Zealand Northern Ireland Norway Oman Pakistan Peru Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan, Republic of China Thailand Turkiye United Arab Emirates United Kingdom Venezuela Viet Nam
Work Phone:*
Fax:*
E-mail:*
Project name and location:*?
Project Stage (Select One):
Feasibility
Budgetary
Currently Bidding
Purchase
Desired flume type: No Preference Parshall Flumes Palmer-Bowlus Flumes Trapezoidal H-Flumes Cutthroat Montana
Manhole Style (Check One):
Dome Top Style The height of a dome top manhole is determined by how high the customer wishes the manhole to extend out of the ground. The extension height plus the distance from the invert of the pipe to the finish grade is the ordering height
Pedestrian Loading Style Aluminum hatch (pedestrian loading) manholes are flush with or slightly above the finish grade. The hatch can be provided: gas tight, water tight, and spring assisted. The ordering height is the distance from the invert of the pipe to the finish grade.
Options available with the pedestrian hatch top also include: pull-up ladder assists, insulation, custom engraving, and multiple types of locking mechanisms.
H-20 Highway Loading Style The top of an H-20 manhole should be one foot below the finish grade. The distance allows for the installation of a cover and concrete ring or one layer of brick to adjust the cover to the roadway grade.
Dome top hinged fiberglass lid with lock hasp H-20 highway loading style (for use with customer supplied grade ring and cover) 22 ½" opening 31 ¾" opening Pedestrian loading style
H-20 highway loading style (for use with customer supplied grade ring and cover)
22 ½" opening 31 ¾" opening
Pedestrian Loading Construction Options(Check One):
Aluminum Steel
Options (Check All that apply):
Watertight
Gastight
Spring assist
Insulated
Ladder assist
Height (Check One):
Dome Top
Pedestrian Loading
H-20 Highway Loading
A.
C. (Typically 1')
B. (Typically A-1')
A.+C.=Order Height =
A. = Order Height =
B. = Order Height =
Diameter (Check One):
48 inch
60 inch
72 inch
(Dome / Pedestrian / H-20)
(Dome / Pedestrian)
Flow Characteristics:
Flow Minimum Flow: GPM MGD CFS L/S M3/HR Average Flow: GPM MGD CFS L/S M3/HR Maximum Flow: GPM MGD CFS L/S M3/HR
Flow Stream Composition
No Selection Made Sanitary Storm Water Industrial Process Mixed Industrial / Sanitary
Chemical Composition andConcentration(s)
Flow Stream Temperature
F C
Connection Requirements:
Pipe Stub Size:
None 2 inch 3 inch 4 inch 6 inch 8 inch 10 inch 12 inch 15 inch 18 inch 21 inch Greater than 21 inches
Connecting pipe type:
None
D.I / PVC
Clay
Concrete
Other
Flume Options:
Select the Desired Flume Options (Check All that apply):
Ultrasonic mounting bracket
Stainless Steel (SS) SS/Aluminum - 2 position adjustable
Bubble tube (SS) Submerged probe cavity Drexelbrook cavity Staff gauge (1/10 and 1/100 foot increments) Staff gauge (1/10 and 1/100 foot and MGD increments - 3"-24" parshall flumes only) FRP grating Removable flat FRP cover Stilling Well
12-inch diameter (standard)
8-inch diameter
Attached
Detached
Removable pH probe holder (SS) 2 inch diameter probe well
Manhole Options:
Select the Desired Manhole Options (Check All that apply):
Intermediate platform
Half diameter Full diameter
Instrument shelf Mounting plate GFI outlet (not wired) 100 watt vapor resistant light with switch (not wired) (non-explosionproof) Goosneck vent (4 inch diameter) Gooseneck vent (4 inch diameter) with in-line exhaust fan
