TRACOM Manholes Application Form

Fill out the following form as completely as possible and click the "submit" button. One of TRACOM's experienced application specialists will analyze the results and provide you with an enclosure quotation.

Please provide the following contact information: (Asterisks (*) denote optional fields).
















Desired flume type:

Manhole Style

Please select:
Dome top hinged fiberglass lid with lock hasp
Pedestrian loading style, aluminum
H-20 highway loading style (for use with customer supplied grade ring and cover)- 31 ¾" opening

Dome Top Style

The height of a dome top manhole is determined by how high the customer wishes the manhole to extend out of the ground. The extension height plus the distance from the invert of the pipe to the finish grade is the ordering height

dometop
Pedestrian Loading Style

Aluminum hatch (pedestrian loading) manholes are flush with or slightly above the finish grade. The hatch can be provided: gas tight, water tight, and spring assisted. The ordering height is the distance from the invert of the pipe to the finish grade.

Options available with the pedestrian hatch top also include: pull-up ladder assists, insulation, custom engraving, and multiple types of locking mechanisms.

Other options:

Watertight Gastight
Spring assist Insulated
Ladder assist

pedestrian
H-20 Highway Loading Style

The top of an H-20 manhole should be one foot below the finish grade. The distance allows for the installation of a cover and concrete ring or one layer of brick to adjust the cover to the roadway grade.


h20

Height

Please select:
  Dome Top
(Typically 1')
  Pedestrian Loading
  H-20 Highway Loading
(Typically A-1')

Diameter

Please select:
48 inches    60 inches    72 inches

Flow Characteristics


Flow Stream Composition





Chemical Composition andConcentration(s)

Connection Requirements

Pipe Stub Size:

Connecting pipe type:
C.I. / PVC Clay Concrete Ductile Iron Other

Desired Flume Options

Select all that apply:
Ultrasonic mounting bracket
             Stainless Steel - fixed Stainless Steel - 2 position adjustable
Bubble tube, stainless steel
Submerged probe cavity, stainless steel
Staff gauge (1/10 and 1/100 foot increments)
Staff gauge (1/10 and 1/100 foot and MGD increments - 3"-24" parshall flumes only)
Fiberglass grating
Removable flat fiberglass cover
Stilling Well
      Size:12-inch diameter 8-inch diameter
      Size:Attached Detached
Removable pH probe holder, stainless steel
2 inch diameter probe well

Manhole Options

Select all that apply:
Intermediate platform
             Half diameter Full diameter
Instrument shelf
Mounting plate
GFCI outlet (not wired)
100 watt vapor resistant light with switch (not wired) (non-explosionproof)
Goosneck vent (4 inch diameter)
Gooseneck vent (4 inch diameter) with in-line exhaust fan